System Components; General; Overview; Options - Fronius TPS 320i Operating Instructions Manual

System components

General

The power sources can be operated with various system components and options. This
makes it possible to optimise procedures and to simplify machine handling and operation,
as necessitated by the particular field of application in which the power source is to be
used.

Overview

(1)
(2)
(2a)
(3)
(4)
(5)
(6)
(7)

Options

OPT/i TPS 2.SpeedNet Connector
Optional second SpeedNet connection socket
Factory-installed on the rear of the power source (but can also be installed on the front of
the power source).
OPT/i TPS 4x Switch SpeedNet
Option, where more than one additional SpeedNet connection socket is required.
IMPORTANT! The OPT/i TPS 4x Switch SpeedNet option cannot be operated in conjunc-
tion with the OPT/i TPS 2. SpeedNet Connector option. If the OPT/i TPS 2.SpeedNet
Connector option is installed in the power source, it must be removed.
OPT/i TPS SpeedNet Connector
Expansion of the OPT/i TPS 4x Switch SpeedNet option
Can only be used in conjunction with the OPT/i TPS 4x Switch SpeedNet option, maxi-
mum of 2 per power source
26
(5)
(4)
(3)
(2)
(1)
Cooling units
Power sources
TPS 400i LSC ADV power source
Robot accessories
Interconnecting hosepacks
Wire-feed units
Wirefeeder holder
Trolleys and gas cylinder holders
(2a)
also:
- Welding torch
- Grounding (earthing) cable and elec-
trode cable
- Dust filter
- Additional current sockets
(6)
(7)