Process Parameters For Tig / Mma/Smaw Setup - Fronius TPS 320i Operating Instructions Manual

R/L measurement
10
Process parame- The following process parameters can be set and displayed for the TIG and rod electrode
ters for TIG / welding process:
MMA/SMAW Set-
up
Starting current time
for setting the length of time the starting current is to be active
Unit
Setting range
Factory setting
Characteristic
for selecting the electrode characteristic
Unit
Setting range
Factory setting
Measurement successful.
Resistance: 5.3 mOhm
Inductance: 9.7 µH
Touch "Finish"
(or press the adjusting dial)
Process parameters for MMA welding:
s
0.0 - 2.0
0.5
- / A/V / -
I-constant / 0.1 - 20.0 / P-constant
I-constant
10
107