Easyjob Mode; General; Activating Easyjob Mode - Fronius TPS 320i Operating Instructions Manual

EasyJob mode

General

If EasyJob mode has been activated, 5 additional buttons appear on the display. These
enable up to 5 operating points to be saved at the touch of a button.
The current welding settings are saved.
Activating Easy-
Job mode
1
2
3
The overview to activate/deactivate EasyJob mode is displayed.
72
1
Select the "Defaults" button in the left-hand ribbon
Select the "View" button in the right-hand ribbon
Select the "EasyJobs" button
2
3
4
5