Settings; Language Selection; Fronius - Fronius TPS 320i Operating Instructions Manual

Settings

Example:
The unit "metric" and the standard "EN" are set on the power source.
Use the tick box under the settings to activate the additional display of an alternative for
each unit or standard.
The values set on the power source are shown with a greyed out tick box and cannot be
modified.
If the tick boxes for the alternative unit or standard are active, the characteristics, material
details and certain welding parameters will be displayed with designations for both stand-
ards and with values for both units.
Language selec-
tion
The language currently set is shown next to the symbol.
To change the language, click on the desired language.

Fronius

138
Click on this symbol to expand the display of characteristics, material details
and certain welding parameters for the power source website.
Alternative units or standards can also be displayed in addition to the units and
standards set on the power source.
If the cursor is hovered over this symbol, the languages available
for the power source website will be displayed.
Click on the Fronius logo to open the Fronius homepage:
www.fronius.com