Retrieving Device Information - Fronius TPS 320i Operating Instructions Manual

5
The default display settings are shown.
Retrieving device
information
*
1
2
3
The device information is displayed.
display replaced synergic lines:
Older, replaced characteristics are displayed in the material settings in addition to the
current characteristics. They can also be selected when making the material settings.
Touch the "OK" button to exit the characteristics
1
The button is only displayed if the OPT/i GUN Trigger option is present on the pow-
er source.
Select the "Defaults" button in the left-hand ribbon
Select the "System" button in the right-hand ribbon
Select the "Information" button
3
*
2
127