Storing Easyjob Operating Points - Fronius TPS 320i Operating Instructions Manual

4
A tick appears in the "EasyJobs on" tick box.
5
EasyJob mode is activated, the default settings are displayed.
6
The 5 EasyJob buttons are displayed.
Storing EasyJob
operating points
1
The size and colour of the button changes. After about 3 seconds, the button is displayed
green with a frame.
The settings have now been stored. The most recently stored settings will be active. An
active EasyJob is indicated by a tick in the EasyJob button.
Select the "EasyJobs on" button
Touch the "OK" button
Select the "Welding" button in the left-hand ribbon
NOTE! The EasyJobs are stored under job numbers 1 - 5 and can also be re-
trieved in "Job Mode".
Saving an EasyJob overwrites any job stored under the same job number!
To store the current welding settings, touch one of the EasyJob buttons for about 3
seconds
73