Summary of the
PMC = Pulse Multi Control
PMC process
PMC is a pulsed arc welding process with high-speed data processing, precise recording
of the process status and improved droplet detachment. Faster welding possible with a sta-
ble arc and even fusion penetration.
Summary of the
LSC = Low Spatter Control
LSC / LSC Ad-
vanced process
LSC is a new, low-spatter dip transfer arc process.
The current is reduced before breaking the short-circuit bridge; re-ignition takes place at
significantly lower welding current values.
LSC Advanced
The TPS 400i LSC ADV is required for the LSC Advanced process.
The TPS 400i LSC ADV accelerates the reduction in current and improves the LSC prop-
erties. The LSC Advanced process is predominantly used when the welding circuit induc-
tivity is higher.
Summary of Syn-
SynchroPulse is available for all processes (Standard/Pulse/LSC/PMC).
chroPulse weld-
Due to the cyclical change of welding power between two operating points, SynchroPulse
ing
achieves a flaking seam appearance and non-continuous heat input.
25