R/L-Check / Alignment - Fronius TPS 320i Operating Instructions Manual

R/L-check / align- Align the welding circuit resistance (R) and welding circuit inductivity (L) if one of the fol-
ment lowing components of the welding system is changed:
-
-
-
-
-
-
Prerequisites for R/L alignment:
The welding system must be complete: closed welding loop with torch and torch hosepack,
wire-feed units, grounding (earthing) cable, interconnecting hosepacks.
Performing R/L alignment:
1
2
The current welding circuit inductivity and welding circuit resistance values are displayed:
104
Torch hosepacks
Interconnecting hosepacks
Grounding (earthing) cables, welding cables
Wire-feed units
Welding torches, electrode holders
Push-pull units
1
Select the "Process parameters" button in the left-hand ribbon
Select the "R/L-check / alignment" button
2