Fcc Compliance; Warning Notices On The Device - Fronius TPS 320i Operating Instructions Manual

FCC Compliance

Warning notices Warning notices and safety symbols are affixed to power sources with the CSA test mark
on the device for use in North America (USA and Canada). These warnings and safety symbols must not
be removed or painted over. They warn against operating the device incorrectly, as this
may result in serious injury and damage.
22
FCC
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer-
ence at his own expense.
Industry Canada RSS
This device complies with Industry Canada licence-exempt RSS stand-
ard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interfer-
ence, including interference that may cause undesired operation of the de-
vice.