Arc Length Stabiliser - Fronius TPS 320i Operating Instructions Manual

Arc length stabi-

Arc length stabiliser

liser
The arc length stabiliser forces short arcs, advantageous for welding, via a short-circuit
current control and keeps them stable even with a variable stick out or external interfer-
ence.
The arc length stabiliser welding parameter is only available on the power source if the
WP PMC (Welding Process Pulse Multi Control) option has been enabled.
Unit
Setting range
Factory setting
0.0
0.1 - 2.0
Application examples
Arc length stabiliser = 0 / 0.5 / 2.0
Activating the arc length stabiliser reduces the arc length until short circuits start to occur.
The frequency of the short circuits is controlled and kept stable.
Increasing the arc length stabiliser causes a further shortening of the arc length (L1 ==>
L2 ==> L3). The advantages of a short, stable and controlled arc can be used more ef-
fectively.
102
- (effect of stabiliser)
0.0 - 2.0
0.0
The arc length stabiliser is deactivated.
The arc length stabiliser is activated.
The arc length is decreased until short circuits start to occur.
Arc length stabiliser = 0
1
Arc length stabiliser = 0.5
2
Arc length stabiliser = 2
3
1
2
*
L L
1 2
L > L > L
1 2 3
I [A]
v [m/min]
D
U [V]
3
I
v
D
U
*
*
L
3
1 3
2
t [s]