Omron F3SG series User Manual page 255

Term
T Teach-in
Troubleshooting support signal
U Upper beam(s)
V Vs
W Warning zone function
Warning zone information
Function to configure target beams of the following functions by interrupting the
beams.
- Fixed Blanking
- Floating Blanking
Information to be signaled to the Auxiliary output or Lamp when any one of a
Muting Sequence Error, Interference/Vibration Information and Light Level
Diagnosis Information signals is in the ON state. To signal the information, the
Troubleshooting Support signal must be assigned to an output destination.
Beams located toward the terminal of the F3SG-R.
Power supply voltage value in your usage environment.
Function to configure part of the detection zone, in which the Safety outputs
are not affected by the beam state. The blocked state of the Warning zone can
be signaled to the Auxiliary output. This function must not be used for safety
applications.
Information to be signaled to the Auxiliary output or Lamp when the Warning
zone is blocked. To signal the information, the Warning Zone information must
be assigned to an output destination.
Appendix
Description
E
F3SG-R
231
User's Manual