F3SG-RE Series Except F3SG-4RE019030 and F3SG-4RE016014
[Backside Mounting]
2-S3
Top/Bottom
Adjustable Bracket
(F39-LGTB)
4
Backside : 2-S3
4
13.6
Standard
Adjustable Bracket
(F39-LGA)
Top/Bottom
Adjustable Bracket
(F39-LGTB)
F3SG-RE30 Series
Dimension A
Dimension C1
4-digit number of the type name
Dimension D
Dimension G
Dimension H
Dimension I
Dimension P
Protective height
Number of Top/Bottom
(C1)
Adjustable Brackets*1
0270 to 1070
1150 to 1950
2030 to 2510
*1. The number of brackets required to mount either one of emitter and receiver.
*2. The Top/Bottom Adjustable Bracket is not useable together with the Standard Fixed Bracket. When it is necessary to use it with another bracket, only
the combination with the Standard Adjustable Bracket is possible.
4-4-3-3. Mounting with Top/Bottom Adjustable Brackets (F39-LGTB)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- The Top/Bottom Adjustable Bracket and Standard Adjustable Bracket allow beam alignment after fixing the bracket to a
wall surface. The angle adjustment range of the Top/Bottom Adjustable Brackets is ±22.5°. The angle adjustment range