Omron F3SG series User Manual page 180

Wiring/Installation
3.
Slide the hooks of the Adjustable Bracket (1) and the Adjustable Bracket (2) in the grooves of the
F3SG-R housing. Lightly tighten the Screw (2). (Fig. 2)
4.
Adjust the Standard Adjustable Bracket to the mounting position of the wall surface. Securely tighten
the Screw (2) to fix the Standard Adjustable Bracket to the housing of the F3SG-R. The recommended
torque to tighten the Screw (2) is 2.0 N•m. (Fig. 3)
Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
F3SG-R
156
User's Manual
<Backside mounting>
Optical surface
Loosen this
of F3SG-R
Screw(2)
Adjustable
Bracket(2)
Screw(1)
Slide the hook
Adjustable
in the groove
Bracket(1)
Adjustable
Bracket(3)
<Backside mounting>
Adjust the bracket
to mounting position
<Side mounting>
Slide the hook
in the groove
Loosen this
Screw(2)
Adjustable
Bracket(2)
Fig. 2
<Side mounting>
Securely
tighten this
Fig. 3
Optical surface
of F3SG-R
Adjustable
Bracket(3)
Screw(1)
Adjustable
Bracket(1)
Securely
tighten this
Adjust the bracket
to mounting position