Cable Connections(F3Sg-Ra Series); Single-Ended Cable - Omron F3SG series User Manual

4-5-3. Cable Connections(F3SG-RA Series)

Extension of the cable must be within a specified length. If it isn't, safety function may not
work properly, resulting in danger.
Perform wiring according to the following procedure.
1.
Connect an emitter cable (F39-JG-L, gray, sold separately) to the emitter-side power cable (gray).
2.
Connect a receiver cable (F39-JG-D, black, sold separately) to the receiver-side power cable (black).

4-5-3-1. Single-Ended Cable

 Single-Ended Cable for Emitter (F39-JGA-L, sold separately)
40.7
M12 IP67 connector
 Single-Ended Cable for Receiver (F39-JGA-D, sold separately)
40.7
M12 IP67 connector
Emitter cable (Gray)
F39-JG3A-L
F39-JG7A-L
F39-JG10A-L
F39-JG15A-L
F39-JG20A-L
L
Insulated vinyl round cable dia. 6.6, 5-wire
(Cross section of conductor: 0.38 mm
L
Insulated vinyl round cable dia. 6.6, 8-wire
(Cross section of conductor: 0.38 mm
Receiver cable (Black)
F39-JG3A-D
F39-JG7A-D
F39-JG10A-D
F39-JG15A-D
F39-JG20A-D
Wiring/Installation
(Unit: mm)
2
/insulator diameter: dia. 1.2 mm)
(Unit: mm)
2 /insulator diameter: dia. 1.2 mm)
L (m)
3
7
10
15
20
E
F3SG-R
165
User's Manual