Omron F3SG series User Manual page 251

Control Unit
Appearance
Control Unit
Appearance
Model
NX-SIH400 Safety input (solid-state): sink
input (PNP) x 4
Test output (solid-state): source
output (PNP) x 2
NX-SID800 Safety input (solid-state): sink
input (PNP) x 8
Test output (solid-state): source
output (PNP) x 2
Model
G9SE-201 Safety output (relay): NO
contact x 2 (instantaneous)
Auxiliary output (solid-state):
source output (PNP) x 1
G9SE-401 Safety output (relay): NO
contact x 4 (instantaneous)
Auxiliary output (solid-state):
source output (PNP) x 1
G9SE-221-T Safety output (relay): NO
contact x 2 (instantaneous), NO
contact x 2 (OFF-delayed)
Auxiliary output (solid-state):
source output (PNP) x 1
Application
• An F39-JGA Single-Ended
Cable is required.
• An F3SG-R with PNP output can
be connected.
Application
• An F39-JGA Single-Ended
Cable is required.
• An F3SG-R with PNP output can
be connected.
• For G9SE-221-T, 16 patterns
of OFF-delayed output for up to 5
or 30 seconds can be set.
Appendix
Specifications
Specifications
F3SG-R
227
User's Manual
E