Omron F3SG series User Manual page 246

Appendix
Cascading Cable (two cables per set, for emitter and receiver)
Appearance
Single-Ended Cable (Round Water-resistant Connector: Connector Connected to Cable, Socket on One
Cable End)
Appearance
Double-Ended Cable (Round Water-resistant Connector: Connectors Connected to Cable, Socket and Plug
on Cable Ends)
Appearance
Y-Joint Plug/Socket Connector
Appearance
4-Joint Plug/Socket Connector
Appearance
F3SG-R
222
User's Manual
Model Cable length
F39-JGR2W 0.2 m
Model Cable length
XS5F-D421-C80-F 1 m
XS5F-D421-D80-F 2 m
XS5F-D421-E80-F 3 m
XS5F-D421-G80-F 5 m
XS5F-D421-J80-F 10 m
XS5F-D421-L80-F 20 m
Model Cable length
XS5W-D421-C81-F 1 m
XS5W-D421-D81-F 2 m
XS5W-D421-E81-F 3 m
XS5W-D421-G81-F 5 m
XS5W-D421-J81-F 10 m
XS5W-D421-L81-F 20 m
Model Cable length
F39-GCNY1 0.5 m
F39-GCNY2
Model
F39-GCN4 M12 connectors.
F39-GCN4-L Used for reduced wiring for connecting F3SG-RA with F3W-MA.
F39-GCN4-D F39-GCN4: Includes one each of F39-GCN4-L and F39-GCN4-D.
F39-GCN4-L: Used to connect F3SG-RA emitter with F3W-MA
emitter.
F39-GCN4-D: Used to connect F3SG-RA receiver (PNP output)
with F3W-MA receiver.
Specifications
Emitter cable:
Cap (5-pin), M12 connector (5-pin)
Receiver cable:
Cap (8-pin), M12 connector (8-pin)
Specifications
M12 connector (4-pin), 4 wires
Specifications
M12 connector (4-pin) on both ends
Remarks
M12 connectors.
Used for reduced wiring.
F39-GCNY1: for F3SG-RE*
F39-GCNY2: for F3SG-RA
*When using this connector, the Operating
Range Selection is fixed to Long Mode.
Remarks