Omron F3SG series User Manual page 175

[Side Mounting]
2-S3
44.6
Top/Bottom 35
26.5
Adjustable Bracket
(F39-LGTB)
23.2
9.6
35
Backside : 2-S3
Top/Bottom
Adjustable Bracket
(F39-LGTB)
F3SG-4RE019030
Dimension C1
Dimension D
Dimension G
Dimension H
Dimension I
Dimension P
Number of Top/Bottom
Adjustable Brackets*
* The number of brackets required to mount either one of emitter and receiver.
4-4-3-3. Mounting with Top/Bottom Adjustable Brackets (F39-LGTB)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- The Top/Bottom Adjustable Bracket and Standard Adjustable Bracket allow beam alignment after fixing the bracket to a
wall surface. The angle adjustment range of the Top/Bottom Adjustable Brackets is ±22.5°. The angle adjustment range
of the Standard Adjustable Brackets is ±15°.
51.65
4
35
40.8
F3SG-4RE016014
190 Dimension C2
140 Dimension D
277.5 Dimension G
303 Dimension H
322 Dimension I
20 Dimension P
Number of Top/Bottom
2
Adjustable Brackets*
Wiring/Installation
2-M5 or M6
<Screw for Top/Bottom Adjustable <Screw for Top/Bottom
Bracket: M5 or M6> Adjustable Bracket: M8>
160
140
277.5
303
322
10
2
2-M8
[ Unit : mm ]
E
F3SG-R
151
User's Manual