Changing The Contour - Siemens SINUMERIK 840D Operating Manual

Parameters
β1
β2
Transition to next
element
Radius
Chamfer
CA
Additional commands
Contour element "End"
The data for the transition at the contour end of the previous contour element is displayed in
the "End" parameter screen.
The values cannot be edited.
8.5.5

Changing the contour

Function
You can change a previously created contour later.
Individual contour elements can be
● added,
● changed,
● inserted or
● deleted.
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Description
End angle to Z axis
Opening angle
Type of transition
Radius

Chamfer

R Transition to following element - radius
FS Transition to following element - chamfer
Grinding allowance
Grinding allowance to right of contour

Grinding allowance to left of contour

Additional G code commands
Programming technological functions (cycles)
8.5 Contour turning - only for G code programs
Unit
Degrees
Degrees
mm
mm
mm
387