Copying/pasting/deleting a program block
The program is opened in the editor.
Deleting program blocks
The buffer memory contents are retained even after the editor is closed, enabling you to
paste the contents in another program, as well.
Opening a second program (Page 160)
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Press the "Mark" softkey.
- OR -
Press the <SELECT> key.
Select the desired program blocks with the cursor or mouse.
Press the "Copy" softkey in order to copy the selection to the buffer
Place the cursor on the desired insertion point in the program and
press the "Paste" softkey.
The content of the buffer memory is pasted.
Use the "Cut" softkey to delete selected program blocks.
Machining the workpiece
4.10 Editing a program