Parameters, G code program
Name of the program to be generated
Retraction plane - (only for
With subsequent residual material removal
Name to save the updated unmachined-part
contour for residual material removal - (only
"Yes" for residual material removal)
Maximum depth infeed - (only for ∇)
1. Grooving limit tool (abs) – (only for face machining direction)
2. Grooving limit tool (abs) – (only for face machining direction)
UX or U
Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
Finishing allowance in Z – (only for UX)
For zero: Continuous cut - (only for ∇)
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
The part program to be executed has been created and you are in the
Press the "Turning" and "Contour turning" softkeys.
Press the "Grooving residual material" softkey.
The "Grooving residual material" input window is opened.
Programming technological functions (cycles)
8.5 Contour turning - only for G code programs