Execution in manual mode
3.3 Traversing axes
3.3
Traversing axes
You can traverse the axes in manual mode via the Increment or Axis keys or handwheels.
During a traverse initiated from the keyboard, the selected axis moves at the programmed
setup feedrate. During an incremental traverse, the selected axis traverses a specified
increment.
Set the default feedrate
Specify the feedrate to be used for axis traversal in the set-up, in the "Settings for Manual
Operation" window.
3.3.1
Traverse axes by a defined increment
You can traverse the axes in manual mode via the Increment and Axis keys or handwheels.
Procedure
122
1.
Select the "Machine" operating area.
2.
Press the <JOG> key.
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Milling