Parameters, G code program
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
The part program to be executed has been created and you are in the
Press the "Turning" softkey.
Press the "Groove" softkey.
The "Groove" input window opens.
Select one of the three groove cycles with the softkey:
Simple groove cycle
The "Groove 1" input window opens.
Groove cycle with inclines, radii, or chamfers.
The "Groove 2" input window opens.
Groove cycle on an incline with inclines, radii or chamfers.
The "Groove 3" input window opens.
∇ + ∇∇∇ (roughing and finishing)
Groove position/reference point:
Reference point in X ∅
Reference point in Z
Groove depth ∅ (abs) or groove depth referred to X0 (inc)
Programming technological functions (cycles)
8.4 Turning - only for G code programs