12.11 Specific search in the tool management lists
Specific search in the tool management lists
There is a search function in all tool management lists, where you can search for the
● Magazine locations or magazines
● Empty locations
You enter a tool name. You can narrow down your search by entering a replacement tool
You have the option of only entering a part of the name as search term.
If only one magazine is configured, then the search is only made for the magazine
If several magazines are configured, then it is possible to search a specific magazine
location in a specific magazine or just to search in a specific magazine.
If the lists with the location type are used, then the empty location search is made using
the location type and location size.
Please refer to the machine manufacturer's specifications.
Select the "Parameter" operating area.
Press the "Tool list", "Tool wear" or "Magazine" softkey.
Press the ">>" and "Search" softkeys.
Press the "Tool" softkey if you wish to search for a specific tool.
- OR -
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0