Introduction
1.2 Operator panel fronts
Key
24
Function
+
<CTRL> + <Y>
Reactivates changes that were undone (only in the program
editor).
+
<CTRL> + <V>
Inserts text from the clipboard:
Pastes the text from the clipboard at the actual cursor
Pastes text from the clipboard at the position of a selected
+
+
<CTRL> + <ALT> + <C>
Creates a complete archive on an external data carrier (USB-
FlashDrive).
+
+
<CTRL> + <ALT> + <S>
Creates a complete archive on an external data carrier (USB-
FlashDrive).
+
+
<CTRL> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-
FlashDrive is not inserted, then the files are backed-up in the
manufacturer's area of the CF-Card.
+
<ALT> + <S>
Opens the Editor to enter Asian characters.
<DEL>
Editing box
Navigation
+
<DEL> + <CTRL>
Editing box
Navigation
position.
text.
Deletes the first character right of the cursor.
Deletes all characters.
Deletes the first word to the right of the cursor.
Deletes all characters.
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Milling