Siemens SINUMERIK 840D Operating Manual page 256

Creating a ShopMill program
7.17 Example, standard machining
9. Drilling/reaming
10. Positions
256
1. Press the "Drilling", "Drilling reaming" and "Drilling" softkeys.
The "Drilling" input window opens.
2. Enter the following technology parameters:
T DRILL10
3. Enter the following parameters:
Diameter/tip
Z1
DT
4. Press the "Accept" softkey.
1. Press the "Drilling", "Positions" and "Drilling Positions" softkeys.
The "Any positions" input window opens.
2. Enter the following parameters:
Z0
X0
Y0
X1
Y1
3. Press the "Accept" softkey.
D1 F 500 mm/min
Tip
-25 abs
0
Rectangular
-10 abs
15 abs
15 abs
165 abs
15 abs
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
S 1600 rev/min
Milling