Siemens SINUMERIK 840D Operating Manual page 448

User variables
10.8 Defining and activating user variables
Activating user data
448
Press the "Open" softkey.
- OR -
Press the <INPUT> key.
- OR -
Press the <Cursor right> key.
The selected file is opened in the editor and can be edited there.
6. Define the desired user data.
7. Press the "Exit" softkey to close the editor.
1. Press the "Activate" softkey.
A prompt is displayed.
2. Select whether the current values in the definition files should be
retained
- OR -
Select whether the current values in the definition files should be
deleted.
This will overwrite the definition files with the initial values.
3. Press the "OK" softkey to continue the process.
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Milling