Siemens SINUMERIK 840D Operating Manual page 21

Key
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Function
<PAGE DOWN>
Scrolls downwards by one page in a window.
+ <PAGE DOWN> + <SHIFT>
In the program manager and in the program editor, from the
cursor position, selects directories or program blocks up to the
end of the window.
+ <PAGE DOWN> + <CTRL>
Positions the cursor to the lowest line of a window.
<Cursor right>
 Editing box
 Navigation
+ <Cursor right> + <CTRL>
 Editing box
 Navigation
<Cursor left>
 Editing box
 Navigation
+ <Cursor left> + <CTRL>
 Editing box
 Navigation
Opens a directory or program (e.g. cycle) in the editor.
Moves the cursor further to the right by one character.
Moves the cursor further to the right by one word.
Moves the cursor in a table to the next cell to the right.
Closes a directory or program (e.g. cycle) in the program
editor. If you have made changed, then these are
accepted.
Moves the cursor further to the left by one character.
Moves the cursor further to the left by one word.
Moves the cursor in a table to the next cell to the left.
Introduction
1.2 Operator panel fronts
21