1.3 Machine control panels
T1 to T15
Traversal axes with rapid traverse superposition and coordinate exchange
Selects an axis.
Select the traversing direction.
Traverse axis in rapid traverse while pressing the direction key.
Switches between the workpiece coordinate system (Work) and machine
coordinate system (Machine).
Spindle control with override switch
Spindle is enabled.
Feed control with override switch
Stops execution of the running program and shuts down axis drives.
Enable for program execution in the current block and enable for ramp-up to
the feedrate value specified by the program.
Keyswitch (four positions)
Front view of machine control panel (milling version)
A machine data code defines how the increment value is
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0