Show Mfdb Staticfiltering; Show Mfdb Stats; Show Mirroring - NETGEAR GSM7324 Reference Manual

show mfdb staticfiltering

This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB)
table.
Format
show mfdb staticfiltering
Mac Address
Type
Description
Interfaces

show mfdb stats

This command displays the Multicast Forwarding Database (MFDB) statistics.
Format
show mfdb stats
Total Entries
Most MFDB Entries
Ever Used
Current Entries

show mirroring

This command displays the Port Mirroring information for the system.
Format
Switching Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
A unicast MAC address for which the switch has forwarding and
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be
displayed as 8 bytes. In an SVL system, the MAC address will be
displayed as 6 bytes.
This displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the
table as a result of a learning process or protocol.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:)
and filtering (Flt:).
This displays the total number of entries that can possibly be in
the Multicast Forwarding Database table.
This displays the largest number of entries that have been present
in the Multicast Forwarding Database table. This value is also
known as the MFDB high-water mark.
This displays the current number of entries in the Multicast For-
warding Database table.
show mirroring
May 30, 2003 Beta Draft
7-45