Config Commands; Config Acl Create; Config Acl Delete; Config Acl Rule Create - NETGEAR GSM7324 Reference Manual

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Source IP Mask
Source Ports
Destination IP Address
Destination IP Mask
Destination Ports
Service Type Field Match
Service Type Field Value

Config Commands

config acl create

This command creates an Access Control List (ACL) that is identified by the parameter
The ACL number is an integer from 1 to 100.
Default
Format
config acl create <aclid>

config acl delete

This command deletes an ACL that is identified by the parameter
Format
config acl delete <aclid>

config acl rule create

This command creates a rule within the ACL referenced by the parameter
identified by the
<rulenum>
ranges from 1 to 10. Rules are created with a default action of deny.
<rulenum>
Default
Format
config acl rule create <aclid> <rulenum>
10-2
This field displays the source IP Mask for this rule.
This field displays the source port range for this rule.
This displays the destination IP address for this rule.
This field displays the destination IP Mask for this rule.
This field displays the destination port range for this rule.
This field indicates whether an IP DSCP, IP Precedence, or IP
TOS match condition is specified for this rule.
This field indicates the value specified for the Service Type Field
Match (IP DSCP, IP Precedence, or IP TOS).
none
parameter. An ACL may have up to 10 user-specified rules, whose
none
May 30, 2003 Beta Draft
<aclid>.
from the system
<aclid>
The rule is
<aclid>.
ACL Commands
.