Show Stats Switch Detailed - NETGEAR GSM7324 Reference Manual

Broadcast Packets Received
Packets Transmitted
Without Error
Transmit Packets Errors
Collisions Frames
Time Since Counters Last Cleared

show stats switch detailed

This command displays detailed statistics for all CPU traffic.
Format
Switching Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast pack-
ets.
The total number of packets transmitted out of the interface.
The number of outbound packets that could not be transmitted
because of errors.
The best estimate of the total number of collisions on this Ether-
net segment.
The elapsed time, in days, hours, minutes, and seconds
since the statistics for this port were last cleared.
show stats switch detailed
Total Packets Received (Octets)- The total number of octets of
data received by the processor (excluding framing bits but includ-
ing FCS octets).
Packets Received Without Error- The total number of packets
(including broadcast packets and multicast packets) received by
the processor.
Unicast Packets Received - The number of subnetwork-unicast
packets delivered to a higher-layer protocol.
Multicast Packets Received - The total number of packets
received that were directed to a multicast address. Note that this
number does not include packets directed to the broadcast
address.
Broadcast Packets Received - The total number of packets
received that were directed to the broadcast address. Note that
this does not include multicast packets.
Receive Packets Discarded - The number of inbound packets
which were chosen to be discarded even though no errors had
been detected to prevent their being deliverable to a higher-layer
protocol. A possible reason for discarding a packet could be to
free up buffer space.
May 30, 2003 Beta Draft
7-11