Transfer Upload Filename; Transfer Upload Datatype - NETGEAR GSM7324 Reference Manual

Table 3. TFTP Upload Example.
TFTP Server path
c:\tftp\
c:\
c:
7000 Series L3 Managed Switch Software provides two methods to clear the directory path
statement.
• The
clear config
• The web browser clear command will remove the directory path statement.
Default
Format

transfer upload filename

This command sets the name for the file that is uploaded from the switch. The switch "remembers"
the last file name used.
Append the file path to the file name if the string is less than 31 characters. Otherwise, use the
"transfer upload path" command, and the File Name will be appended to the File Path.
Note: This command is valid only when the Transfer Mode is TFTP. See"transfer upload mode" .
Default
Format

transfer upload datatype

This command sets the type of file to upload from the switch.
Format
The datatype is one of the following:
config
errorlog
msglog
traplog
Switching Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
command will remove the directory path statement.
Blank
transfer upload path <path>
Blank
transfer upload filename <name>
transfer upload datatype <config|error-
log|msglog|traplog>
Configuration file
Error log
Message log
Trap log (the default)
May 30, 2003 Beta Draft
TFTP Client path
blank
tftp\
\tftp\
7-65