Config Router Ospf Virtif Delete; Config Router Ospf Virtif Authtypekey; Config Router Ospf Virtif Transdelay; Config Router Ospf Virtif Interval Dead - NETGEAR GSM7324 Reference Manual

L3 managed switch 7000 series, software v1.0
Hide thumbs Also See for GSM7324:
Table of Contents

Advertisement

config router ospf virtif delete

This command deletes the OSPF virtual interface from the given interface, identified by <areaid>
and <neighbor>. The <neighbor> parameter is the IP address of the neighbor.
Format

config router ospf virtif authtypekey

This command configures the authentication type and key for the OSPF virtual interface identified
by <areaid> and <neighbor>. The <neighbor> parameter is the IP address of the neighbor. The
value for <type> is either none or simple. The [key] is composed of standard displayable, non-
control keystrokes from a Standard 101/102-key keyboard. The authentication key must be 8 bytes
or less if the authentication type is simple password. If the key is cryptographic, the key may be up
to 256 bytes. Unauthenticated interfaces do not need an authentication key.
Default
Format

config router ospf virtif transdelay

This command configures the transit delay for the OSPF virtual interface on the virtual interface
identified by <areaid> and <neighbor>. The <neighbor> parameter is the IP address of the
neighbor. The range for <seconds> is 0 to 3600 (1 hour).
Default
Format

config router ospf virtif interval dead

This command configures the dead interval for the OSPF virtual interface on the virtual interface
identified by <areaid> and <neighbor>. The <neighbor> parameter is the IP address of the
neighbor. The range for <seconds> is 1 to 65535.
Default
Format
Routing Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
config router ospf virtif delete <areaid> <neighbor>
The default value for authentication type is none. The default
password key is not configured.
config router ospf virtif authtypekey <areaid> <neigh-
bor> <none|simple> [key]
1
config router ospf virtif interval transdelay <areaid>
<neighbor> <0-3600>
40
config router ospf virtif interval dead <areaid>
<neighbor> <1-65535>
May 30, 2003 Beta Draft
8-25

Advertisement

Table of Contents
loading

Table of Contents