Show Router Ospf Interface Summary - NETGEAR GSM7324 Reference Manual

Format
OSPF Area ID
Spf Runs
Area Border Router Count
AS Border Router Count
Area LSA Count
IP Address
OSPF Interface Events
Virtual Events
Neighbor Events
External LSA Count
LSAs Received The number of LSAs received.
Originate New LSAs

show router ospf interface summary

This command displays the OSPF settings for all interfaces in the router.
Format
Slot.Port
AdminMode
Area ID
Router Priority
Hello Interval
Dead Interval
Retrax Interval
Retrax Delay
LSA Ack Interval
Routing Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
show router ospf interface stats <slot.port>
The area id of this OSPF interface.
The number of times that the intra-area route table has been cal-
culated using this area's link-state database.
The total number of area border routers reachable within this
area. This is initially zero, and is calculated in each SPF pass.
The total number of Autonomous System border routers reach-
able within this area.
The total number of link-state advertisements in this area's link-
state database, excluding AS External LSAs.
The IP address associated with this OSPF interface.
The number of times the specified OSPF interface has changed its
state, or an error has occurred.
The number of state changes or errors that occurred on this virtual
link.
The number of times this neighbor relationship has changed state,
or an error has occurred.
The number of external (LS type 5) link-state advertisements in
the link-state database.
The number of LSAs originated.
show router ospf interface summary
The interface being displayed.
The administrative status of OSPF in the router. Possible values
are Enable or Disable.
The OSPF area ID for the specified interface.
The OSPF priority for the specified interface.
The OSPF hello interval for the specified interface.
The OSPF dead interval for the specified interface.
The OSPF retransmit interval for the specified interface.
The OSPF transit delay for the specified interface.
The OSPF LSA acknowledgement interval for the specified inter-
face.
May 30, 2003 Beta Draft
8-11