Show Spanningtree Summary; Config Spanningtree Adminmode; Config Spanningtree Forceversion - NETGEAR GSM7324 Reference Manual

7000 Series L3 Managed Switch Reference Manual for Software v1.0

show spanningtree summary

This command displays spanning tree settings and parameters for the switch.
Format
Spanning Tree Adminmode
Spanning Tree Version
Configuration Name
Configuration Revision Level
Configuration Digest Key
Configuration Format Selector
MST Instances

config spanningtree adminmode

This command sets the spanningtree operational mode. While disabled, the spanningtree
configuration is retained and can be changed, but it is not activated.
Default
Format

config spanningtree forceversion

This command sets the Force Protocol Version parameter to a new value. The <version> can be
one of the following:
• 802.1d - ST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1d functionality
supported)
• 802.1w - RST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1w functionality
supported)
• 802.1s - MST BPDUs are transmitted (IEEE 802.1s functionality supported)
Default
Format
7-50
show spanningtree summary
Enabled or disabled.
Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w,
or IEEE 802.1d) based upon the Force Protocol Version parame-
ter
TConfigured name.
Configured value.
Calculated value.
Configured value.
List of all multiple spanning tree instances configured on the
switch
disable
config spaningtree adminmode <enable/dis-
able>
802.1s
config spanningtree forceversion <802.1d/
802.1w/802.1s>
May 30, 2003 Beta Draft
Switching Commands