Config Ip Forwarding; Show Ip Stats; Config Routing; Show Router Ip Interface Summary - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config ip forwarding

This command enables or disables forwarding of IP frames.
Default
Format

show ip stats

This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed. This command takes no options.
Format

config routing

This command enables or disables the IP Router Admin Mode for the master switch.
Format

show router ip interface summary

This command displays summary information about IP configuration settings for all ports in the
router. This command takes no options.
Format
Slot.Port
IP Address
IP Mask
Netdir Bcast
MultiCast Fwd
In Access Mode
Out Access Mode
8-10
enable
config ip forwarding <enable|disable>
show ip stats
config routing <enable|disable>
show router ip interface summary
The interface being displayed on the row.
The IP address of the routing interface in 32-bit dotted decimal format.
The IP mask of the routing interface in 32-bit dotted decimal format.
Indicates if IP forwards net-directed broadcasts on this interface. Possible values
are Enable or Disable.
Indicates the multicast forwarding administrative mode on the interface.
Possible values are Enable or Disable.
Indicates the inbound access list checking administrative mode on this interface.
Possible values are Enable or Disable.
Indicates the outbound access list checking administrative mode on this
interface. Possible values are Enable or Disable.
202-10009-01
Routing Commands