Config Users Add; Config Users Passwd; Config Users Delete - NETGEAR GSM7324 Reference Manual

SNMPv3AccessMode
Authentication
Encryption

config users add

This command adds a new user (account) if space permits. The account <name> is up to eight
alphanumeric characters. The <name> is not case-sensitive.
Six user names can be defined.
Format

config users passwd

This command changes the password of an existing operator. The password is up to eight
alphanumeric characters. The name and password are not case-sensitive.
When a password is changed, a prompt will ask for the operator's former password. If none, press
enter.
Default
Format

config users delete

This command removes an operator.
Format
Note:
Switching Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
Read Only access. There can only be one Read/Write user and up
to 5 Read Only users.
This field displays the SNMPv3 Access Mode. If the value is set
to the SNMPv3 user will be able to set and retrieve
ReadWrite,
parameters on the system. If the value is set to
SNMPv3 user will only be able to retrieve parameter information.
The SNMPv3 access mode may be different than the CLI and
Web access mode.
This field displays the authentication protocol to be used for the
specified login user.
This field displays the encryption protocol to be used for the
specified login user.
config users add <name>
Blank (indicating no password)
config users passwd <user>
config users delete <name>
The admin user account cannot be deleted.
May 30, 2003 Beta Draft
the
ReadOnly,
7-61