Config Ip Interface Netdirbcast; Config Ip Interface Create; Config Ip Interface Delete; Show Ip Summary - NETGEAR GSM7324 Reference Manual

Format

config ip interface netdirbcast

This command enables or disables the forwarding of network-directed broadcasts.
The value for <mode> is either enable or disable. When enabled, network directed broadcasts are
forwarded. When disabled they are dropped.
Default
Format

config ip interface create

This command configures an IP address on an interface.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface. This changes the label "IP address" in "Show IP Interface."
Format

config ip interface delete

This command deletes an IP address from an interface.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface.
Format

show ip summary

This command displays all the summary information of the IP. This command takes no options.
Routing Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
config ip interface mtu <slot.port> <576-
1500>
enable.
config ip interface netdirbcast <slot.port>
<enable/disable>
config ip interface create <slot.port>
<ipaddr> <subnetmask>
config ip interface delete <slot.port>
<ipaddr> <subnetmask>
May 30, 2003 Beta Draft
8-5