Show Spanningtree Cst Port Summary - NETGEAR GSM7324 Reference Manual

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Topology Change Count
Topology Change
Designated Root
Root Path Cost
Root Port Identifier
Root Port Max Age
Root Port Bridge
Forward Delay
Hello Time
Bridge Hold Time
CST Regional Root
Regional Root Path Cost
Associated FIDs
Associated VLANs

show spanningtree cst port summary

This command displays the status of one or all ports within the common and internal spanning
tree. The parameter <slot.port/all> indicates the desired switch port or all ports.
Format
MST Instance ID
Slot.Port
Type
STP State
Port Role
Link Status
Link Trap
7-54
Number of times changed.
Boolean value of the Topology Change parameter for the switch
indicating if a topology change is in progress on any port
assigned to the common and internal spanning tree.
Value of the Root Path Cost parameter for the common and inter-
nal spanning tree.
Derived value
Derived value
Derived value
Configured value
Minimum time between transmission of Configuration Bridge
Protocol Data Units (BPDUs)
List of forwarding database identifiers currently associated with
this instance.
List of VLAN IDs currently associated with this instance.
show spanningtree cst port summary
<slot.port/all>
CST
The interface being displayed
Currently not used.
The forwarding state of the port in the specified spanning tree
instance
The role of the specified port within the spanning tree.
The operational status of the link. Possible values are "Up" or
"Down".
The link trap configuration for the specified interface.
May 30, 2003 Beta Draft
Switching Commands