Quick Start Up Physical Port Data; Quick Start Up User Account Management - NETGEAR GSM7324 Reference Manual

Quick Start up Physical Port Data

Quick Start up Physical Port Data
Table 6-2.
Command Details
Displays the Ports
show port all
Slot.Port
Slot Options
0 - The slots on the front of the switch (10/100 ports)
Port Options
Ports 1-24 are copper ports
Ports 21-24 fiber ports
Type - Indicates if the port is a special type of port
STP State - Displays the Spanning Tree status
Admin Mode - Selects the Port Control Administration State
Physical Mode - Selects the desired port speed and duplex mode
Physical Status - Indicates the port speed and duplex mode
Link Status - Indicates whether the link is up or down
Link Trap - Determines whether or not to send a trap when link status changes
LACP Mode - Displays whether LACP is enabled or disabled on this port.

Quick Start up User Account Management

Table 6-3. Quick Start up User Account Management
Command
show users
show loginsession
Quick Startup
7000 Series L3 Managed Switch Reference Manual for Software v1.0
Details
Displays all of the users that are allowed to access the switch
Access Mode - Shows whether the user is able to change
parameters on the switch (Read/Write) or is only able to view then
(Read Only).
As a factory default, admin has Read/Write access and guest has
Read Only access. There can only be one Read/Write user and up
to 5 Read Only users.
Displays all of the login session information
May 30, 2003 Beta Draft
6-3