9.5.2
Standard unit of measurement for flow
▪
Select [uni.F] and set the unit of measurement for
standard display (
3
l/min, m
/h, m/s, ft
The consumption quantity (meter reading) is
automatically displayed with the unit of measurement
that provides the highest accuracy.
9.5.3
Standard unit of measurement for temperature
▪
Select [uni.T] and set the unit of measurement for
standard display (
°C and °F
9.5.4
Measuring value damping
▪
Select [dAP.F] and set damping constant in seconds:
( value 63%)
9.5.5
Switching logic for outputs
▪
Select [P-N] and set PnP or nPn.
9.5.6
Low flow cut-off
▪
Select [LFC] and set the limit value below which a flow is
evaluated as a standstill.
7.1):
3
3
/m,ft
/h, ft/s
7.1):
Menu CFG
[uni.F]
Menu CFG
[uni.T]
Menu CFG
[dAP.F]
Menu CFG
[P-N]
Menu CFG
[LCF]
53