Logbook - Siemens SINUMERIK 840D sl Operating Manual

21.7

Logbook

The logbook provides you with the machine history in an electronic form.
If service is carried out on the machine, this can be electronically saved. This means that it is
possible to obtain a picture about the "History" of the control and to optimize service.
Editing the logbook
You can edit the following information:
● Editing information on the machine identity
● Make logbook entries (e.g. "filter replaced")
Output of the logbook
You have the possibility of exporting the logbook by generating a file using the "Save
version" function in which the logbook is contained as section.
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Select the following via a checkbox:
• Version data (.TXT): Output of pure version data in text format.
• Configuration data (.XML): Output of configuration data in XML
format. The configuration file contains the data you entered under
Machine identity, the license requirements, the version information
and the logbook entries.
7. Press the "OK" softkey to start the data transfer.
– Machine name/No.
– Machine type
– Address data
Alarms, error messages, and system alarms
21.7 Logbook
647