Siemens SINUMERIK 840D sl Operating Manual page 479

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Operating Manual, 09/2011, 6FC5398-7CP40-2BA0

Select the "Machine" operating area.

Select the operating mode "JOG", "MDA" or "AUTO".

Press the menu forward key and the "Settings" softkey.

Press the "Multi-channel view" softkey.

The "Settings for multi-channel view" window is opened.

Set the multi-channel or single-channel view and define which channels

are to be seen in the "Machine" operating area - and in the editor - in

which sequence.

Multi-channel view

9.4 Setting the multi-channel view

Sinumerik 828d