Siemens SINUMERIK 840D sl Operating Manual page 121

Deactivate handwheel
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
1. Position the cursor on the handwheel whose assignment you wish to
cancel (e.g. No. 1).
2. Press the softkey for the assigned axis again (e.g. "X").
- OR -
Open the "Axis" selection box using the <INSERT> key, navigate to the
empty field, and press the <INPUT> key.
Clearing an axis selection also clears the handwheel selection (e.g., "X"
is cleared for handwheel no. 1 and is no longer active).
Setting up the machine
2.10 Handwheel assignment
121