Save Information - Siemens SINUMERIK 840D sl Operating Manual

Alarms, error messages, and system alarms
21.6 Version
21.6.2

Save information

All the machine-specific information of the controller is combined in a configuration via the
user interface. You can save machine-specific information on the drives that have been set-
up.
Procedure
646
1. Select the "Diagnostics" operating area.
2. Press the "Version" softkey.
It takes some time to call the version display. While the version data is
being determined a progress message box and the appropriate text are
displayed in the dialog line.
3. Press the "Save" softkey.
The "Save version information: select archive" window opens. The
following storage locations are offered depending on the configuration:
• Local drive
• Network drives
• USB
• Version data (archive: Data tree in the "HMI data" directory)
4. Then press the "New directory" softkey if you wish to create your own
directory.
5. Press the "OK" softkey. The directory is created.
6. Press the "OK" softkey again to confirm the storage location.
The "Save version information: name" window opens. The following
options are available:
• In the "Name:" text field, The file name is pre-assigned with
<Machine name/no.>+<CF-card number>. "_config.xml" or
"_version.txt" is automatically attached to the file names.
• In text field "Comment", you can add a comment, which is stored
with the configuration data.
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling