Siemens SINUMERIK 840D sl Operating Manual page 445

Parameters, G code program
PL Machining plane
Parameter Description
TC Name of the swivel data set
Retraction
No: No retraction before swiveling
•
Z: Retraction in the direction of machine axis Z
•
Z, X, Y: Move machining axis to retraction position before swiveling
•
Tool direction, max.: Maximum retraction (up to the software end position) in the
•
tool direction
Tool direction, inc.: Retraction, incremental (up to the software end position) in the
•
tool direction
When retracting in the tool direction, in the swiveled machine state, several axes
can move (travel).
ZR Retraction path - (only for incremental retraction in the tool direction)
Swivel plane
New: New swivel plane
•
Additive: Additive swivel plane
•
X0 Reference point for rotation X
Y0 Reference point for rotation Y
Z0 Reference point for rotation Z
Swivel mode
Axis by axis: Rotate coordinate system axis-by-axis
•
Solid angle: Swivel via solid angle
•
Proj. angle: Swiveling via projection angle
•
Direct: Directly position rotary axes
•
Axis sequence Sequence of the axes which are rotated around: - (only for axis-by-axis swivel mode)
XYZ or XZY or YXZ or YZX or ZXY or ZYX
X Rotation around X
Y Rotation around Y
Z Rotation around Z
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Programming technological functions (cycles)
Parameters, ShopMill program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
- (only for axis sequence)
8.6 Further cycles and functions
mm/min
mm/rev
rpm
m/min
Unit
Degrees
Degrees
Degrees
445