Siemens SINUMERIK 840D sl Operating Manual page 230

Creating a ShopMill program
7.1 Program views
Figure 7-3
The animated help displays are always displayed with the correct orientation to the selected
coordinate system. The parameters are dynamically displayed in the graphic. The selected
parameter is displayed highlighted in the graphic.
The color symbols
Red arrow = tool traverses in rapid traverse
Green arrow = tool moves with the machining feedrate
Parameter screen with programming graphics
230
Parameter screen with help display
In the screen, you can toggle between the help display and the program
graphics using the "Graphic view".
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling