Siemens SINUMERIK 840D sl Operating Manual page 428

Programming technological functions (cycles)
8.5 Contour turning - only for G code programs
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
RP Retraction plane – (only for
machining direction,
longitudinal, inner)
SC Safety clearance
F Feedrate
Residual With subsequent residual material removal
material
Yes
•
No
•
CONR Name to save the updated unmachined-part
contour for residual material removal – (only
"Yes" for residual material removal)
Parameter Description
Machining
•
•
Machining
•
direction
•
Position
•
•
•
•
D Maximum depth infeed - (only for ∇)
XDA 1. Grooving limit tool (abs) – (only for face machining direction)
XDB 2. Grooving limit tool (abs) – (only for face machining direction)
UX or U Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
UZ Finishing allowance in Z – (only for UX)
DI For zero: Continuous cut - (only for ∇)
BL Blank (unmachined part) description (only for ∇)
•
•
•
428
mm
mm
*
∇ (roughing)
∇∇∇ (finishing)
Face
Longitudinal
front
back
internal
external
Cylinder (described using XD, ZD)
Allowance (XD and ZD on the finished part contour)
Contour (additional CYCLE62 call with blank contour – e.g. cast iron mold)
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Unit
mm
mm
mm
mm
mm
mm
Milling