Siemens SINUMERIK 840D sl Operating Manual page 267

9. Drilling/reaming
10. Positions
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
1. Press the "Drilling", "Drilling reaming" and "Drilling" softkeys.
The "Drilling" input window opens.
2. Enter the following technology parameters:
T DRILL10
3. Enter the following parameters:
Diameter/tip
Z1
DT
4. Press the "Accept" softkey.
1. Press the "Drilling", "Positions" and "Drilling Positions" softkeys.
The "Any positions" input window opens.
2. Enter the following parameters:
Z0
X0
Y0
X1
Y1
3. Press the "Accept" softkey.
Creating a ShopMill program
7.17 Example, standard machining
D1 F 500 mm/min
Tip
-25abs
0
Rectangular
-10abs
15abs
15abs
165abs
15abs
S 1600 rev/min
267