Siemens SINUMERIK 840D sl Operating Manual page 28

Introduction
1.2 Operator panel fronts
Key
28
Function
+ + <CTRL> + <ALT> + <C>
Creates a complete archive on an external data carrier (USB-
FlashDrive).
+ + <CTRL> + <ALT> + <S>
Creates a complete archive on an external data carrier (USB-
FlashDrive).
+ + <CTRL> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-
FlashDrive is not inserted, then the files are backed-up in the
manufacturer's area of the CF-Card.
+ + <SHIFT> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-
FlashDrive is not inserted, then the files are backed-up in the
manufacturer's area of the CF-Card.
+ + <SHIFT> + <ALT> + <T>
Starts "HMI Trace".
+ + <SHIFT> + <ALT> + <T>
Exits "HMI Trace".
+ <ALT> + <S>
Opens the Editor to enter Asian characters.
<DEL>
• Editing box
• Navigation
+ <DEL> + <CTRL>
• Editing box
• Navigation
Deletes the first character right of the cursor.
Deletes all characters.
Deletes the first word to the right of the cursor.
Deletes all characters.
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling